Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Phoenix, AZ
If you need a gate company in Phoenix, AZ, the job usually starts with the sun, not the hardware. Gate Installation in Phoenix means matching a new gate to a property that may be a 1960s ranch home in 85020 or a 1990s subdivision tract house a few miles north, and to a climate that bakes wood, warps vinyl, and pushes metal past its limits. We specialize exclusively in gates, working across manual swing gates and full electric access systems. Call (855) 574-0402 for a free estimate.
Why Phoenix Homes Are Different
Phoenix’s desert climate does more damage to a gate in five years than a milder climate manages in twenty. Summer highs routinely pass 110°F, UV runs strong all year, and the air stays dry, so wood shrinks and splinters, vinyl discolors and turns brittle, and metal expands, warps, and scorches to the touch. Then the monsoon season from July through September arrives with dust storms and flash flooding that bend posts and rust exposed hardware in a single afternoon.
The housing stock amplifies this. The central and north Phoenix ZIP codes cover everything from 1950s and 60s ranch homes with original wrought-iron or wood gates to 1980s through 2000s tract homes with vinyl and ornamental steel. Because a large share of these gates are now 20 to 50 years old, our repair calls lean toward rusted hinges, sagging posts, and sun-bleached or cracked panels rather than brand-new installs. In neighborhoods like 85020 and 85021, 1960s ranch homes still carry original wrought-iron gates whose decorative scrolls have rusted through at the welds from years of UV and monsoon moisture. HOAs across Phoenix also tend to enforce gate appearance and setback rules, so it pays to check your community’s standards before you pick a replacement.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Phoenix Services
Most Phoenix homeowners call us about two things: a gate that’s failing or an electric system that’s stopped responding.
Gate Repair in Phoenix
Manual and mechanical repair here is mostly renewal work. Sun-dried wood needs stabilizing or replacing board by board, rusted hinges need cutting out and re-hanging, and sagging posts need resetting to proper footing depth so the gate swings true again. In 85021 and nearby pockets, that often means re-welding and repainting original wrought-iron scrollwork that has rusted through at the welds instead of scrapping the gate. We assess the frame, the hardware, and the latch before recommending anything. For details, see Gate Repair in Phoenix.
Electric Gate Repair in Phoenix
Electric gates in Phoenix fail for reasons that have little to do with the motor. Heat cooks control boards, dust and grit jam tracks and rollers, and monsoon moisture finds its way into exposed wiring and loop detectors. We diagnose the whole chain: the operator, the board, the safety sensors, the access hardware, and the intercom integration if there is one. Whether your opener is a FAAC, a BFT, or a Linear unit, we troubleshoot across brands rather than pushing a replacement. Full detail lives on our electric gate repair page.
Gate Installation in Phoenix
Gate Installation in Phoenix is a different job than it is almost anywhere else. A gate that’s specified for a mild climate will discolor, warp, or seize within a few summers here, so material choice and hardware selection matter as much as the swing itself. That’s why we start with Gate Installation as a measured, specified job rather than a same-day swap, and why we walk the property before quoting. Most Phoenix gates we’re asked to replace are original or first-replacement units on mid-century ranch homes and 1990s to 2000s subdivisions, and the failure is almost always sun and heat rather than abuse. Our technicians have up to 11 years of experience with exactly this kind of work.
Automatic Gate Installation
Signs you need it
You’re tired of opening a heavy driveway gate by hand, or the existing manual gate has settled enough that it no longer lines up without lifting.
What it costs in Phoenix
Automatic gate installation in Phoenix typically runs $2,500 to $6,500 depending on gate size, operator model, and whether a power run is needed.
How we do it
We measure the opening, confirm the swing or slide path and footing depth, specify the operator and safety edges, then set posts, hang the gate, wire power, and commission the system with the homeowner present.
Driveway Gate Installation
Signs you need it
The gate is too narrow for your vehicles, the posts are leaning beyond what re-setting will fix, or the panel has cracked through after years of heat.
What it costs in Phoenix
Driveway gate installation in Phoenix typically falls between $1,800 and $5,500 for a single-leaf or double-leaf drive gate, with material and width driving the range.
How we do it
We survey the driveway width and grade, choose a material suited to full sun, dig posts to proper footing depth, hang the leaves, and fit hinges, latches, and stops before final adjustment.
What Gate Installation Costs in Phoenix
| Item | Typical range in Phoenix |
|---|---|
| Automatic gate installation | $2,500 – $6,500 |
| Driveway gate installation | $1,800 – $5,500 |
| Electric gate installation | $3,000 – $7,500 |
Can you install a gate that survives Phoenix summers?
Yes. We specify materials and finishes rated for intense UV and 110°F-plus heat, usually powder-coated steel, aluminum, or a composite rather than untreated wood. The written estimate names the material, operator, and hardware before any work starts.
Do you handle the power run and the safety edges on a new gate?
Yes. A new electric gate in Phoenix includes the operator, control board, safety edges, loop detectors, and the power run to the motor. We quote the whole scope so there’s no second contractor and no surprise invoice.
Brands We Service in Phoenix
We work on nine major gate and access-control brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Same-brand replacement parts are sourced as needed, and cross-brand troubleshooting keeps an install moving without a long stall. See our brands for the full roster.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Phoenix, AZ
| Service | Typical range in Phoenix |
|---|---|
| Gate repair (hinges, latches, panels) | $180 – $650 |
| Electric gate repair | $250 – $900 |
| Control board replacement | $350 – $850 |
| Loop detector and sensor repair | $200 – $600 |
| Automatic gate installation | $2,500 – $6,500 |
| Driveway gate installation | $1,800 – $5,500 |
| Electric gate installation | $3,000 – $7,500 |
| Sliding gate installation | $2,200 – $6,000 |
In Phoenix, price climbs with gate width, material choice, and how much site work the posts need after years of monsoon movement. The written estimate sets the final price, and we agree it with you before any work starts.
Neighborhoods We Serve in Phoenix
We cover central and north Phoenix, including the older ranch-home blocks where original gates are still in place and the newer subdivisions where vinyl and ornamental steel are reaching the end of their service life. Dispatch across the metro is fast from 7am to 7pm, Sunday through Friday.
- 85020
- 85021
- 85012
- 85029
- 85051
Service Area – Cities Near Phoenix
We handle gate work across Phoenix and the surrounding valley. Readers in neighboring communities can find local detail on their own page: Paradise Valley, AZ, Glendale, AZ, Tempe, AZ, and Peoria, AZ. The same sun and monsoon conditions shape the work in all of them, and the same nine-brand repair capability comes with us.
Serving Phoenix, AZ – Our Local Coverage Area
We serve Phoenix and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Phoenix
We answer 24/7 and dispatch fast from 7am to 7pm, Sunday through Friday. Same-day repair is often possible in Phoenix. A call outside dispatch hours is booked into the next opening.
Often yes for the permit, and almost always yes for HOA approval if your community has one. Check with your city’s building department and your HOA before ordering materials, since appearance and setback rules vary block to block.
Yes. We cover central and north Phoenix, including 85079, 85080, 85082, and 85097, plus the surrounding valley cities. If you’re unsure whether your address is in range, call us and we’ll confirm.
When a gate fails in this heat, one call should cover it. Call (855) 574-0402 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Our technicians have up to 11 years of experience, and the price is quoted and agreed before any work starts.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically the same day.
- 4You approve before work beginsNothing starts until you say go.
What Phoenix Customers Say
"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Maya Shah"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
- Carlos Garcia"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
- Miguel Mendoza