Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Installation for Peoria Homeowners
A gate that’s worn out, too small, or simply never had an opener on it holds you back every single day. If you’re planning a new driveway gate or replacing one that’s failing, Gate Repair Peoria installs manual and electric gate systems across Peoria and the surrounding West Valley. This is a gate-only job for our team. Our technicians have up to 11 years of experience, and we work with the brands most West Valley properties already run. We quote the job in writing before any work begins, so you know the number before we start. Free estimates. Call (855) 574-0402. We answer 24/7.
Automatic Gate Installation
Automatic Gate Installation is the full package: a new gate hung on properly set posts with a motor, controls, and safety devices wired in from the start. You need it when you’re building a new entry, replacing a manual gate, or taking over a property where the old operator is obsolete. We measure the opening, set the posts to the right depth, hang the leaf or panel, then mount and program the operator. We handle the power run and safety edges as part of the job. Cost depends on gate size, material, and operator, so we give you a written figure after the measure. Call (855) 574-0402 for a free estimate.
What We Measure Before We Quote
We check the driveway slope and the opening width first, because both decide which operator will work and which won’t. We also look at where power can come in and how the ground drains after a monsoon. Those details shape the written estimate you get.
Matching the Gate to the Entry
Materials matter here. Steel, aluminum, and wood each move differently in desert heat, and the operator has to match the weight and swing of what you choose. We walk you through the trade-offs before you commit to a design.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Gate Installation Services
Gate Installation Services cover everything from a small pedestrian gate to a wide double-leaf driveway entry, done by one specialist instead of a handoff between contractors. You reach for this when an existing gate is beyond repair, when you’re adding a gate where there wasn’t one, or when a property change means the old system no longer fits. We survey the site, settle the design, and install the gate and any hardware it needs. We stay on the same job from the first measurement to the final test cycle. Pricing is set per job by the written estimate. Call (855) 574-0402.
Residential and Commercial Work
Homeowners and property managers both call us, and the work differs. A single residential gate is a smaller install; a gated community or commercial entrance needs more planning around traffic and access control. We scope each one separately.
One Specialist From Start to Finish
Because we only install gates, nothing gets subbed out to a fence crew or a general handyman. You deal with the same people from measure to final walk-through. If a question comes up mid-job, there’s no phone tag between trades.
Electric Gate Installation
Electric Gate Installation means fitting a gate with a motorized operator, control board, and access hardware so it opens without anyone leaving the car. You want it when a manual gate has become a chore, or when a new entry needs remote, keypad, or intercom access. We mount the operator, wire the controls, set the limits, and test the safety reverse before we call it done. We know Viking and Elite equipment and how each behaves on a heavier leaf. The written estimate sets the price, and it’s free to get one. Call (855) 574-0402.
Power and Control Wiring
The power run is usually the part that trips up a general contractor, and it’s where we start. We plan the circuit and the control wiring together so the operator has clean power and the access hardware talks to the board. Low-voltage runs for keypads and loops get mapped at the same stage.
Safety Devices and Testing
Every electric install finishes with a full test cycle on the safety edges and any obstruction sensors. If the gate meets something, it has to stop and reverse. We don’t sign off until that test passes.
Driveway Gate Installation
Driveway Gate Installation puts a working gate across the vehicle entrance, sized and hung for the traffic it will actually see. You need it when a property has an open driveway you want to control, or when an aging gate has settled and won’t swing true anymore. We set posts to proper footing depth, hang the leaves, and check the clearance over the full swing so nothing drags. Driveways here often slope, so we account for grade before we order anything. Free written estimate, quoted before work starts. Call (855) 574-0402.
Swing and Double-Leaf Setups
Most driveways take a swing gate, single or double leaf. We check which side has room to swing open and how the gate meets the driveway edge. That decides the layout before a single post goes in.
Working With the Site
Desert ground and slope are the two things that change a driveway job. We check drainage away from the posts and the grade across the opening. Getting that right up front saves a callback later.
Sliding Gate Installation
Sliding Gate Installation hangs a gate that rolls along a track instead of swinging open, which suits a driveway with no room to swing or a slope that makes a swing gate awkward. You’d choose it when the entry is tight, the driveway is steep, or you want a gate that stays clear of parked cars. We set the track and posts level, fit the rollers, and align the gate so it travels smoothly the full length. Sliding gates carry real weight, so the footing and track have to be right. Call (855) 574-0402 for a free estimate.
Track and Roller Setup
The track is the foundation of the whole install, so we set it level and anchor it properly. Rollers get fitted and adjusted so the gate runs without binding. If the posts settle out of line, the gate will jump the track, so this stage gets the most attention.
Keeping Heavy Panels Safe
A sliding gate is a heavy moving panel, and it needs guides and stops to stay where it belongs. We fit the hardware that keeps it from leaving the track. That’s a safety matter, not a finishing touch.
Gate Opener Installation
Gate Opener Installation fits the motor and controls that make a gate automatic, whether the gate is already there or going in at the same time. You need it when a gate opens by hand today and you want it automated, or when an old opener has failed and the gate itself is still sound. We match the operator to the gate’s weight and swing, mount it, and program the remotes and limits. We work with Ghost Controls and DoorKing openers among others, and we choose based on the gate, not a favorite brand. Call (855) 574-0402.
Matching the Operator to the Gate
An opener that’s too small for the leaf will strain and fail early. We weigh the gate and check how it swings before picking an operator. That sizing step is the difference between an opener that lasts and one that keeps tripping out.
Access Control Integration
Keypads, remotes, and intercom entry all tie into the opener’s control board. We wire those in and test each access point. If it opens at the keypad, it opens the same way at the remote.
Gate Fabrication
Gate Fabrication means building a gate to fit an opening or a design that an off-the-shelf gate won’t handle. You need it when the entry is an odd width, when a property or HOA has a specific look to match, or when a replacement has to match a fence line. We build to the opening and the hardware it will carry, so the gate hangs true and the operator isn’t fighting a badly balanced leaf. Metal work is measured and built to the space, not trimmed to fit. We quote the job in writing and it’s free. Call (855) 574-0402.
Custom Sizes and Styles
Odd openings and styled entries are where fabrication earns its keep. We take the measurements on site and build to them. You get a gate that fits the space instead of one that’s been forced to.
Built to Carry Its Hardware
A custom gate still has to hold an opener and the access hardware you choose. We build the frame with that weight and motion in mind. It keeps the install clean when the operator goes on.
Brands We Service
We install and service equipment from LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. With Viking, we know the operator line and how it handles a mid-weight residential leaf, so we can match the right model to your gate. Ghost Controls is a common choice for lighter residential installs, and we’re familiar with where those units wear. DoorKing comes up on gated communities and commercial entries, and we know its access and control hardware. Elite is another name we work with on heavier swing and slide gates, and we understand its control boards and limits.
That range matters when something needs a part. It means we can order on brand instead of guessing, and we can troubleshoot across different makes when a property has mixed equipment. Whether your opener is a LiftMaster or a Mighty Mule, we know it. Whether you have Viking or any other make, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Your gate no longer clears the ground. A gate that drags or scrapes has settled posts or a bad hinge, and forcing it makes both worse. That’s a sign the hardware needs a look, not more pushing.
- The opener runs but the gate doesn’t move. That usually points to a stripped gear, a dead control board, or a limit out of adjustment. Diagnosing which one takes the right tools and test sequences.
- The gate won’t reverse when it meets an object. A safety edge or sensor has failed, and that’s a hazard you want fixed right away. Don’t keep running the gate until it’s checked.
- A slide gate has come off its track. A heavy panel off the track can injure someone and damage the gate. Stop using it and get it looked at before anyone runs it again.
- You’re ready for a new gate or opener. If you’re planning an install, getting a written measure early beats guessing. That way the design, power, and operator all get settled before you order anything.
Our Process, Step by Step
- 1
Free on-site measure. We come out, measure the opening, check the slope and drainage, and see where power can come in. This visit sets the scope and confirms what’s possible for the entry.
- 2
Written estimate and design. We put the gate, operator, and access hardware into one written price and go over it with you. The estimate is free, and the written price is what you pay, quoted and agreed before any work starts.
- 3
Ordering and scheduling. Once the design is set, we order the gate and hardware to spec. Installation is measured and scheduled, so the timing is clear from the start.
- 4
Installation. We set posts to proper footing depth, hang the gate, and mount and program the operator. Power, controls, and safety devices go in at this stage, with the full system tested as we go.
- 5
Final test and walk-through. We run the gate through full cycles, test the safety reverse, and check every access point. Then we walk you through operation and hand over the controls.
How Much Does Gate Installation Cost in Peoria?
Gate installation in Peoria is priced per job after we measure, and the written estimate sets the final number. A typical driveway gate install runs higher than a pedestrian gate because of size, footing, and the operator. An electric install adds the motor, control board, and wiring on top of the gate itself. On existing equipment, repair estimates are separate and usually lower than a full replacement.
What moves the price: gate size and material, whether it’s a swing or slide gate, the operator you choose, and how much trenching the power run needs. A sloping driveway or a tight entry adds planning time, which shows up in the scope. Post depth and footing are part of every install, not an add-on.
To avoid overpaying, get a written measure and ask what’s included, especially the power run, safety edges, and any access hardware. Ask whether the estimate covers disposal of an old gate. If a quote is vague about those items, the extra cost shows up later. A free estimate from our team spells out what’s in and what’s out, so you compare like for like. Call (855) 574-0402.
Our Service Area Near Peoria
We install gates in Peoria and work across the West Valley, from Surprise and Glendale to Phoenix, Avondale, and out to Scottsdale, Paradise Valley, Fountain Hills, Tempe, and Mesa. If you want to know how we handle existing systems, our Peoria page covers the local work. Drive times vary by location, and install visits are scheduled around the measure. Call (855) 574-0402 to plan yours.
Serving Peoria, AZ – Our Local Coverage Area
We serve Peoria and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Gate Installation in Peoria
Gate installation is fitting a new gate on posts set to proper depth and hanging it so it moves correctly, plus any opener and access hardware. It covers a manual gate through a full automatic setup. We handle the measure, the install, and the final test cycle as one job.
Most residential installs take a day or a few, depending on gate size, operator, and how much power work is needed. Electric and sliding gates take longer than a simple manual swing gate. We schedule the install after the measure so you know the timeline up front.
The cost depends on gate size, material, operator, and site conditions, and the written estimate sets the final price. We give you a free written figure after the measure. Call (855) 574-0402 for an exact quote.
Yes. LiftMaster is one of the brands we install and service, along with FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. From a full install to cross-brand troubleshooting, we work on all of them.
New gate and opener installs are measured, ordered, and scheduled, so they aren’t a same-day job. For an existing gate in trouble, we can look at it quickly. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
We stand behind the work we do; ask about coverage for your specific job when we quote it. The written estimate spells out the scope, so the terms are clear before you commit. Call (855) 574-0402 to go over it.
Clear the area around the opening so we can measure and set posts without obstruction. Make sure we can reach the power source if you’re adding an electric operator. Beyond that, the measure tells us what’s needed, so there isn’t much prep on your end.
Schedule Your Gate Installation Service in Peoria Today
Planning a new gate, or replacing one that’s past saving? One call covers installation and everything in between. We measure, quote in writing, and install. Call (855) 574-0402 for a free, no-obligation estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Gate Repair Peoria.